Clyr Touch: setup and everyday control
Choose the correct operating mode, pair the display to the right controller, and understand manual control versus schedules.
01 / Start with the right guide
Match your equipment
Clyr Touch can operate as a controller or as a screen for an existing controller. Start with the role specified for your installation; the registration steps are different.
- 1Installed operating mode
- 2Correct controller or registration
- 3Equipment and pool data
How the parts work together. This is a system overview, not a terminal wiring diagram.
02 / Get ready
Before you start
- Record the device model, firmware, installed role and controller identity.
- Have the installer complete power and any communication wiring before app setup.
- Identify the correct pool and controller in the mobile app, especially if you manage more than one site.
03 / One step at a time
Set it up
Confirm the installed role
On Clyr Touch, open the gear icon → Operating Mode. Controller Mode manages equipment as the controller. Screen Mode displays equipment belonging to an existing controller. Keep the mode specified by the installation.
Register or pair using the correct route
Controller Mode: complete Wi-Fi setup, then use Settings → Devices → Add → Clyr Touch in the mobile app and follow registration. Device Information provides the MAC identity when needed.
Screen Mode: first finish setup of the main controller. In the mobile app, open Settings → Devices → Add → Equipment, select that controller, choose Clyr Touch, and set the address supplied for the installation. Save, then confirm the screen shows that controller’s equipment.
Read the equipment card before controlling it
Check the device name, live reading and current mode. Open its card to see the available controls. Where a SET button is shown, changing the displayed number alone does not apply it; review the value and then tap SET.
Test only equipment that is already commissioned and ready to operate. Follow its flow, temperature and other operating requirements. A screen indication is not a substitute for observing the physical result.
Understand Manual and Schedule
Manual control lets you request equipment changes directly. Schedule returns the equipment to its configured schedule behavior. Create or edit schedules in the mobile app; the touchscreen is not the schedule editor.
The clip shows the mobile scheduling workflow, not the Clyr Touch screen.
Shared app skill · not equipment wiring Follow the Clyr scheduling workflow. Select the equipment in this guide and use the times and settings commissioned for your pool.
Open on YouTube · 0:00–1:51 ↗Return to the intended operating state
After testing, restore the intended equipment modes. Check the main controller and touchscreen agree on the relevant equipment and readings.
04 / Prove the result
Check it works
A saved setting tells you what you requested. These checks tell you what the equipment actually did.
- The correct controller and pool equipment appear.
- Displayed readings are current and plausible.
- A supervised command reaches the intended equipment.
- Equipment is left in the intended Manual or Schedule state.
05 / Find the next useful check
If something is wrong
Equipment is missing or belongs to another controller
Check the selected operating role and paired controller identity. In Screen Mode, manage equipment on the main controller; do not duplicate equipment to hide a pairing problem.
A schedule cannot be edited on the screen
Use the mobile app to edit schedules, then verify the change on the correct controller.
06 / Save for later
Keep these handy
Product instructions
Use the manual supplied with your exact equipment and controller revision. If the connectors, labels or app choices differ, stop and contact Clyr with a photo of the model label and the screen you are on.
Ask Clyr for help →