Controller backlight

01 / Start with the right guide

Match your equipment

Use this guide only on a Clyr controller with the supported built-in ring/backlight. It does not add an external lamp to a controller that lacks the hardware.

1. 1Clyr app
2. 2Backlight preset
3. 3Built-in controller light

How the parts work together. This is a system overview, not a terminal wiring diagram.

02 / Get ready

Before you start

• Confirm the correct controller is online and has the backlight hardware.
• Check whether a Backlight item already exists before adding another.

03 / One step at a time

Set it up

1. 01

   Open the backlight setup

   In Settings → Devices, choose the controller, then select its Backlight item. If it has not been configured, add the supported Backlight equipment entry.

2. 02

   Choose and save a preset

   Select the desired preset in the preview and save. This form uses a preset selector rather than the AUX and Delay fields used by external relay lights.

3. 03

   Check the physical controller

   Observe the built-in light. Confirm the intended controller changes and pool lights remain unaffected. If the expected option is absent, confirm hardware and firmware support with Clyr.

04 / Prove the result

Check it works

A saved setting tells you what you requested. These checks tell you what the equipment actually did.

• The selected controller’s built-in light displays the requested preset.
• No external light, pump or relay changes state.

05 / Find the next useful check

If something is wrong

06 / Save for later

Keep these handy

Product instructions

• Clyr installation and power guide ↗

Use the manual supplied with your exact equipment and controller revision. If the connectors, labels or app choices differ, stop and contact Clyr with a photo of the model label and the screen you are on.